Niko 05-711 User Manual

59
05-711
- Press the ‘program’ key for >2s. This does not affect the connected
lighting.
- Put the analog control in the section ‘input’ of the programming mode:
LED ‘input’ blinks.
- Repeatedly press the ‘select’ button briefly to select the next control
mode. The selected control mode is indicated by the corresponding
control mode LEDs (see following diagram).
In programming mode, the ‘control mode’ LEDs have the following
meaning:
LED status meaning
Selection of 0-10V control (mode 1)
Selection of 1-button control (mode 2)
Selection of 2-button operation (mode 3)
Press the programming button >2s to save the settings and exit the
programming mode.
EN
prog
> 2s.
select
select
select

Niko 05-711 Specifications

General

Brand	Niko
Model	05-711
Category	Controller
Language	English