Nikon 1 AW1 Quick Start Guide

After using the Nikon 1 AW1 underwater, thoroughly rinse the camera in clean water, pressing
the various buttons and extending the built-in pop-up flash to ensure that any salt or foreign
matter is removed from all parts of the camera.
Nikon recommends cleaning the AW1 within 60 minutes of underwater use.
Immerse the camera in fresh water, with its waterproof 1 NIKKOR lens attached to
remove salt or other foreign matter. Leave the camera/lens submerged in a basin
for about 10 minutes. Press the flash pop-up button, rotate the zoom ring if you’ve
got that lens attached and operate the camera’s controls while in fresh water.
After rinsing the Nikon 1 AW1 camera, pat it dry and then let it fully air dry in a cool, shady spot.
Wipe the camera dry. Using a soft, dry cloth, dry the camera and lens barrel.

Nikon 1 AW1 Specifications

General

Sensor Type	CMOS
Effective Pixels	14.2 million
ISO Sensitivity	160-6400
Lens Mount	Nikon 1 mount
Autofocus System	Hybrid AF (phase-detection/contrast-detect AF)
Display Size	3.0 inches
Camera Type	Mirrorless
Screen Type	TFT LCD
Built-in Flash	Yes
GPS	No
Wi-Fi	No
Dimensions	113.3 x 71.5 x 37.5 mm
Sensor Size	13.2 x 8.8 mm
Continuous Shooting Speed	15 fps
Video Recording	1080/30p
Waterproof	Yes (15m)
Shockproof	Yes (2m)
Freezeproof	Yes (-10°C)
Battery Life	Approx. 220 shots
Image Stabilization	Lens-based
Shutter Speed	1/16000 to 30 s
LCD Screen	921, 000 dots