Maintenance
Proper care and maintenance of the Nikon 1 AW1’s O-ring is important to keep the
waterproof integrity of the camera and attached waterproof 1 NIKKOR lens.
Carefully remove the O-ring to check it for wear or nicks. You can use either your fingers or an
optional O-ring remover.
When performing routine checks and lubrication of the O-ring, you can remove it
from the camera body either using your fingers or an optional O-ring remover.
While holding the camera securely, lightly stretch the O-ring by sliding your fingers
along either side and remove it from the camera.
To Next Page
Loading...
