Nikon 1 AW1 Quick Start Guide

Check the integrity of the O-ring, looking for nicks or other signs of wear. The O-ring is what
keeps the waterproof integrity of the camera, so it is important that it is cared for correctly.
Check the O-ring for nicks or cracks, and thoroughly wash it in fresh water, drying
it thoroughly.
Do not use benzene, thinner, alcohol, soap, neutral detergents, or other cleaning
products, as these could damage or weaken the O-ring!
Using a bulb blower, carefully remove dust or foreign matter that may be adhering to the O-ring
or the O-ring guide channel.
Check the O-ring guide for foreign matter and use a blower or cotton swab to clean
off any dirt. Be sure to remove any threads left behind from the cotton swab.
To grease the O-ring, use only the silicon grease that is designed for use with the camera. Place

Nikon 1 AW1 Specifications

General

Sensor Type	CMOS
Effective Pixels	14.2 million
ISO Sensitivity	160-6400
Lens Mount	Nikon 1 mount
Autofocus System	Hybrid AF (phase-detection/contrast-detect AF)
Display Size	3.0 inches
Camera Type	Mirrorless
Screen Type	TFT LCD
Built-in Flash	Yes
GPS	No
Wi-Fi	No
Dimensions	113.3 x 71.5 x 37.5 mm
Sensor Size	13.2 x 8.8 mm
Continuous Shooting Speed	15 fps
Video Recording	1080/30p
Waterproof	Yes (15m)
Shockproof	Yes (2m)
Freezeproof	Yes (-10°C)
Battery Life	Approx. 220 shots
Image Stabilization	Lens-based
Shutter Speed	1/16000 to 30 s
LCD Screen	921, 000 dots