Nikon 1 AW1 Quick Start Guide

After cleaning the camera once it has been used underwater, make sure it is fully dry. Then
remove the lens.
After you’ve confirmed that the lens and camera are dry, detach the lens and
gently wipe the lens O-ring seal with a soft, dry cloth to remove any foreign matter.
There may still be water between the camera and lens, so keep the camera flat
and remove the lens slowly and carefully.
After you carefully detach the waterproof lens from the Nikon 1 AW1, use a soft cloth to fully dry
the rear of the lens where it attaches to the camera.
Using the soft, dry cloth, carefully clean the lens.

Nikon 1 AW1 Specifications

General

Sensor Type	CMOS
Effective Pixels	14.2 million
ISO Sensitivity	160-6400
Lens Mount	Nikon 1 mount
Autofocus System	Hybrid AF (phase-detection/contrast-detect AF)
Display Size	3.0 inches
Camera Type	Mirrorless
Screen Type	TFT LCD
Built-in Flash	Yes
GPS	No
Wi-Fi	No
Dimensions	113.3 x 71.5 x 37.5 mm
Sensor Size	13.2 x 8.8 mm
Continuous Shooting Speed	15 fps
Video Recording	1080/30p
Waterproof	Yes (15m)
Shockproof	Yes (2m)
Freezeproof	Yes (-10°C)
Battery Life	Approx. 220 shots
Image Stabilization	Lens-based
Shutter Speed	1/16000 to 30 s
LCD Screen	921, 000 dots