Nikon 35Ti - Page 3

FCA22001-R. 3399. A
SPECIFICATIONS
1. OUTLINE
(1)Shopoting disatnce range : 0, 4m to infinity
(2)Light Measuring Sensor : SPD with a §-area metering system
(3)Exposure control range : EV2 to 17 at ISO 100
(AEV level for auto flash : EVO or lower (at ISO0S200)
operation
(5)Guide Number of flash : 9(1SO 100, in meter)
(6)AF control pulse > 833 pulses
(7)Base length > 30mm
(Q)Metering range > BV -3 TO 12
(9)Time exposure limit > Max, 10 min,
(@Illuminators for viewfinder and analogue display
@ In Auto mode : Only the LED illuminator for the viewfinder information
lights up automatically when ambiant light reaches BV
2.0 or lower,
@) In Manual mode > By switching on the $3 button (Self-timer/illuminator
button), two illuminators light up according to ambient
light conditions as in the following table,
| | Viewfinder | Analog Displa
Lights up
2. REQUIRED TIME FOR FILM ADVANCE/REWIND OPERATION
Malfunction of film loading occurs when PI pulse
The automatic film rewinding starts when:
@ Winding by one edge is not completed within
2 seconds, or
@) The camera winds for 0.5 sec, after the 37th
frame has been taken,
By a rewinding timer:
At MANUAL rewind ---- 8 sec, /edge
OPERATION
Malfunction of auto film
loading
Film winding
SAuto film rewindig
Auto film rewind stops
At MANUAL rewind ---- 8 sec, /edge
By turning on the manual rewinding switch
Film rewind motor turns normally for 0.5 sec. after
Manual rewinding
Fork becomes free after the
completion of film rewind the completion of film rewind operation,
= ML goto