EasyManua.ls Logo

Nikon Z 30 User Manual

Nikon Z 30
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Updating the Z 30 “C” firmware to version 1.10 gives access to
the features described below.
“Firmware version”
To view the camera firmware version or update the camera
firmware, select [Firmware version] in the setup menu.
Features available with “C” firmware
version 1.10
Updates can be performed using a computer or smart device.
Computer: Check the Nikon Download Center for new versions of the
camera firmware. Information on performing updates is available via
the firmware download page.
https://downloadcenter.nikonimglib.com/
Smart device: If the smart device has been paired with the camera
using the SnapBridge app, the app will automatically notify you when
updates become available, and you can then download the update to
the camera memory card via the smart device. For information on
performing updates, see SnapBridge online help. Note that automatic
notifications may not be displayed at exactly the same time as the
updates are made available on the Nikon Download Center.
En
CT3D01(11)
6MO07711-01
Question and Answer IconNeed help?

Do you have a question about the Nikon Z 30 and is the answer not in the manual?

Nikon Z 30 Specifications

General IconGeneral
Megapixel20.9 MP
Camera typeMILC Body
Sensor typeCMOS
Sensor formatDX
Image stabilizerNo
Total megapixels21.51 MP
Image sensor size- \
Image formats supportedJPEG, NEF, RAW
Supported aspect ratios1:1, 3:2, 16:9
Maximum image resolution5568 x 3712 pixels
Image sensor size (W x H)23.5 x 15.7 mm
Still image resolution(s)5568 x 3712, 4176 x 2784, 2784 x 1856, 3712 x 3712, 2784 x 2784, 1856 x 1856, 5568 x 3128, 4176 x 2344, 2784 x 1560, 3840 x 2160, 1920 x 1080
Optical zoom- x
Focus-
Focus adjustmentAuto
Auto focusing (AF) modesContinuous Auto Focus, Multi Point Auto Focus, Single Auto Focus
Product colorBlack
Light meteringCentre-weighted, Highlight-weighted, Matrix
ISO sensitivity100, 25600, Auto
Light exposure modesAuto, Manual
ISO sensitivity (max)256
ISO sensitivity (min)100
Light exposure correction± 3EV (1/3EV step)
Battery typeEN-EL25
Number of batteries supported1
Camera shutter typeElectronic
Fastest camera shutter speed1/4000 s
Slowest camera shutter speed30 s
Flash modesRed-eye reduction, Slow synchronization
Video recordingYes
Video resolutions1920 x 1080, 4096 x 2160 pixels
Motion JPEG frame rate120 fps
Maximum video resolution3840 x 2160 pixels
Resolution at capture speed1920x1080@100fps, 1920x1080@120fps, 1920x1080@24fps, 1920x1080@25fps, 1920x1080@30fps, 1920x1080@50fps, 1920x1080@60fps, 3840x2160@24fps, 3840x2160@25fps, 3840x2160@30fps
Audio systemstereo
Compatible memory cardsSD, SDHC, SDXC
Display diagonal3 \
Display resolution1040000 dot
Display aspect ratio3:2
Display diagonal (metric)7.5 cm
USB connectorUSB Type-C
HDMI connector typeMicro
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Self-timer delay2, 3, 5, 10, 20 s
Weight and Dimensions IconWeight and Dimensions
Depth59.5 mm
Width128 mm
Height73.5 mm
Weight350 g
Weight (including battery)405 g

Summary

Features available with "C" firmware version 1.10

Firmware version management

View and update camera firmware via the setup menu using a computer or smart device.

Support for power zoom lenses

Custom controls for power zoom

Assign 'Power zoom +' and 'Power zoom –' to Fn buttons for electronic zoom control.

Custom Settings f7 and g5: Power zoom (PZ) button options

Using Q/Q buttons for power zoom

Control electronic zoom with Q/Q buttons, including remote grip and remote control.

Power zoom speed selection

Select zoom speed using buttons assigned with power zoom role; set pre/post recording.

New setup menu option: Save zoom position (PZ lenses)

Save and restore zoom position

Automatically saves and restores zoom position when the camera is turned on/off.

New indicator for focal length in shooting display

New Custom Setting: g7 Red REC frame indicator

Red border for video recording notification

Red border appears around shooting display during video recording to prevent missed shots.

New setup menu option: USB connection for iPhone

Importing pictures from camera to iPhone

Use NX MobileAir app to import pictures from camera to iPhone via USB cable.

New indicator for video recording time

Changed autofocus operation with Recall focus position

Autofocus behavior with Recall focus position

Focus mode changes to manual when lens Fn2 button is pressed to recall focus position.

Support for MC-N10 Remote Grip

MC-N10 Remote Grip functionality

Used for video, photography, and adjusting settings remotely via rosette attachment.

Related product manuals