What to do if my Nikon Z 8 displays a 'no memory card' error?
If your Nikon Digital Camera displays a 'no memory card' error, the memory card may be inserted incorrectly or not at all. Check that the card is inserted correctly.
Why does my Nikon Z 8 display a wireless/TCP/IP/FTP error?
If your Nikon Digital Camera displays a wireless, TCP/IP, or FTP error, it may be because the connection settings require adjustment. Check the settings for the wireless router, FTP server, or host computer and adjust the camera settings appropriately. Also, check the error code for more information.
What to do if my Nikon Digital Camera displays 'Ethernet cable is not connected'?
If your Nikon Digital Camera displays the message 'Ethernet cable is not connected', select [USB-LAN] for [USB data connection] in the network menu and then connect an Ethernet cable via a third-party USB-to-Ethernet adapter inserted in the camera’s USB data connector.
What to do if upload is interrupted and fails to resume on Nikon Digital Camera?
If the upload is interrupted and fails to resume on your Nikon Digital Camera, the upload will resume if the camera is turned off and then on again.
What to do if 'Connecting to computer' does not clear from the Nikon Z 8 display?
If “Connecting to computer” does not clear from the display of your Nikon Digital Camera, check the firewall settings.
General| Camera Type | Mirrorless |
|---|---|
| Sensor Type | CMOS |
| Sensor Resolution | 45.7 MP |
| Image Processor | EXPEED 7 |
| ISO Sensitivity | 64-25600 (expandable to 32-102400) |
| Dimensions | 144 x 118.5 x 83 mm |
| Weather Sealing | Yes |
| Sensor Size | 35.9 x 23.9 mm |
| Viewfinder | 3.69M-dot OLED electronic viewfinder |
| Monitor | 3.2-inch tilting touchscreen LCD, 2.1M dots |
| Video Recording | 8K UHD at 30p |
| Storage Media | CFexpress Type B |
| Battery | EN-EL15c |
| Weight | 910 g |
| Autofocus System | 493-point hybrid phase-detection/contrast AF |
| Continuous Shooting Speed | Up to 20 fps (RAW), Up to 30 fps (JPEG) |
To Next Page
