Nikon Z 8 - Choosing a Default Fine-Tuning Value

Choosing a Default Fine-Tuning Value
Select [AF fine-tuning options] in the setup menu, then highlight [Default] and press 2
.
Press 4 or 2 to fine-tune autofocus.
Choose from values between +20 and −20.
The current value is shown by g, the previously-selected value by o.
The larger the fine-tuning value, the farther the focal point is from the lens; the smaller the
value, the closer the focal point.
Press J to save the new value.
724
AF Fine-Tuning Options
1
2
3