Attaching the MB-N12
Before attaching the MB-N12, tur
n the camera off. To prevent unintended operation while attachment
is in progress, leave the control lock on the MB-N12 in the L (locked) position until the process is
complete.
Remove the contact cap from the battery pack.
Keep the contact cap in a safe place.
Remove the battery-chamber cover from the bottom of the camera and place it in the
battery-chamber cover holder on the MB-N12.
If a battery is inserted in the camera, remove it.
873
Optional MB-N12 Power Battery Packs
1
2
To Next Page
Loading...
