Need help?Do you have a question about the Nikon MD-3 and is the answer not in the manual?
General| Brand | Nikon |
|---|---|
| Model | MD-3 |
| Category | Digital Camera |
| Language | English |
Introduction to the Nikon Motor Drive MD-3, its purpose, and operation.
Step-by-step guide for physically connecting the motor drive to the Nikon F2 camera.
Instructions for loading film and setting the frame counter with the motor drive attached.
Details on installing, life-span, and checking batteries for the MB-2.
Details on installing, life-span, and checking batteries for the MB-1.
Information on using AC/DC converters and alternative power sources.
Explanation of the frame counter's function, calibration, and operation.
Explains the function and settings of the mode selector ring.
How to perform single-frame exposures using the motor drive.
How to perform continuous shooting with the motor drive.
Instructions for rewinding film after shooting with the motor drive.
Guide to making double exposures using the 'S' mode.
Guide to making multiple exposures using the 'C' mode.
How to synchronize the motor drive with flash units for shooting.
Instructions for firing multiple cameras in unison using the motor drive.
Explanation of timing factors and diagrams for motor drive operations.
Using the MC-4 cord to trigger the motor drive remotely.
Using the MT-1 for timing control and special effects.
Wireless FM remote control for operating cameras at a distance.
Light-signal-based remote control for safe operation up to 60m.
Charger for NC Battery Unit MN-1, with multiple input voltage options.
Provides alternative trigger positions and accepts cable releases.
Ergonomic grip for improved fingertip operation with telephoto lenses.
Protective jacket for the MB-1 battery pack against cold.
Technical details of the Nikon Motor Drive MD-3.
Guidelines for achieving the best performance from batteries.
To Next Page