Nikon MD-3 - MODE CONTROL (SC) RING; Mode Control (SC) Ring; OPERATION; Single-frame Shooting

MODE
CONTROT
(SC)
R|NG
OPERATION
For
single-frame
shooting,
set
the mode
selector ring at
"S"
and for continuous
shooting, set it
at "C."
Depress
the
ring lock-release
and select the
operation mode re-
quired.
The usable
shutter speeds
are
from
1 to 1l2OO0
sec.
plus
B
for
single-frame
shooting, and from
X
(1/80)
to 112000 sec.
for
continuous. When
the ring is
at the
"L"
position,
the trigger
button
will
be
locked.
Use
this
setting when
you
are not
shooting, as it will
prevent
acci-
dental exposures.
Single-frame
shooting
Depress the
SC
locking button
on the motor
drive hand-
grip
and
turn the
mode selector ring to
"S."
As soon as
the trigger
button
is released,
the motor
drive auto-
matically winds
on the film
and cocks the
shutter
ready
for
the next
exposure. When
using shutter
speeds
slower
than 1/60
sec., be sure
to keep the trigger
button
de-
pressed
long enough
for the
shutter to complete
the
exposure.
Otherwise,
the exposure
time may
be
shortened
unintentionally.
Do
not
press
the trigger while
the film
is
being wound.