Nikon MD-3 - REMOTE CONTROL; Remote Cord MC-4; Intervalometer MT-1

REMOTE
CONTRO1
Remote
Cord MC-4
The
motor drive
can also
be triggered
by
connecting
the
Remote
Cord
MC-4
to
its remote
terminal.
The
shutter
will
be
released by
contact
between
the two
ends of the
remote
cord.
An
extension
cable
can also be
connected;
any
length
is acceptable,
so long
as
the circuit
resistance
does
not
exceed
100
ohms.
lntervalometer
MT-l
This
timing
control device
enables various
special-effects
photographic
techniques
such
as time-lapse,
work-sampl-
ing,
time-exposure
and
delayed-exposure.
lts output
socket
should be
connected
to
the remote
terminal
on
the
motor drive
via
the
Extension
Cord
MC-5.