24
En
13. Supplied accessories*
• Dedicated slip-on front lens cap • Rear lens cap LF-1 • Dedicated lens hood HK-31
• Semi-soft case CL-L1 • Dedicated slip-in filter holder • 52mm screw-in NC filter
• Strap LN-1
* If dedicated accessories are broken or missing, contact your nearest Nikon service center or
representative office as they are not available at general shops.
14. Optional accessories
• 52mm screw-in filters (except circular polarizing filter II)
• Slip-in circular polarizing filter C-PL3L
• AF-S Teleconverters (TC-14EII/TC-17EII/TC-20EII)
15. Specifications
Type of lens: G-type AF-S Nikkor lens having built-in CPU and Nikon bayonet
mount. Special vibration reduction (VR) mechanism incorporated
Focal length: 200mm
Maximum aperture: f/2
Lens construction: 13 elements in 9 groups (3 ED and 1 Super ED glass), as well as 1
protective glass
Picture angle: 12˚20’ [8˚ with Nikon digital cameras (Nikon DX format); 9˚50’ with
IX240 system cameras]
Distance information: Output to camera body
Focusing: Nikon Internal Focusing (IF) system (utilizing an internal Silent Wave
Motor); manually via separate focus ring.
Vibration reduction: Lens-shift method using voice coil motors (VCMs)
Shooting distance scale: Graduated in meters and feet from 1.9m (7 ft.) to infinity (∞)
Closest focusing distance: 1.9m (6.2 ft.)
Diaphragm: Fully automatic
Aperture scale: f/2–f/22
Exposure measurement: Via full-aperture method with cameras with CPU interface system
Focusing limit switch: Provided; two ranges available: FULL (∞–1.9m), or ∞–5m
Tripod collar: Rotatable through 360˚, lens rotating position index at 90˚, tripod
collar only detachable
Dimensions: Approx. 124mm dia. x 203mm extension from the camera's lens
mounting flange
Weight: Approx. 2900g (6.4 lbs)
To Next Page
Loading...
