·Type
of
battery:
3V
CR2
lithium battery
·Battery
condition indicators
~a
: Battery
has
enough
power
for
use.
<§a
:
Battery
is
getting
low.
\
I
I
-
pd[-
flashing
: Battery
is
low
and
battery
should
be replaced.
I I
\
~=.;~~
disappears : Battery
is
exhausted and should
be replaced.
,
\
I
I
,...
*Flashing
battery
mark-
~§01
..
-
on the
LCD
warns
that
the
battery should be replaced.
I
I \
CD
Open
the
battery chamber cover
Using the
ball
of
the thumb, etc. in the recessed part
of
the battery chamber cover, rotate the cover
following
the
Open/Close
arrow indicator.
It
may
not
open easily
due
to
its rubber packing for water
resistance.
®
Replace
the
old
battery with a new one
Insert
a new battery
with
the[+]
and[-]
correctly positioned following
the"Battery installation"
indication
seal
in the battery chamber.[+] pole should
be towards the inside
of
the chamber.
If
the
battery
is
not
inserted correctly, the Nikon
Laser
Rangefinder
will
not
operate.
@
Close
the
battery chamber cover
Align the
Open/Close indicator
with
the
white
dot
and insert the battery chamber cover. Using the
ball
of
the thumb, etc., turn the cover
following
the arrow indicator.
It
may
not
close easily due
to
the rubber
packing for water resistance,
but
continue
to
turn
it
all
the way
until
it
stops. Confirm
that
the cover
is
securely closed.
•
Battery
life
Continuous operation:
Approx. 2,000
times (at approx.
20°C)
Target focusing, measurement, and automatic power-off
are
included
in a
single cycle.
This figure may differ
according
to
condition, temperature, and other factors such
as
target shape,
color,
etc.
*The
Nikon
Laser
Rangefinder comes
with
a
3V
CR2
lithium
battery. However, due
to
natural electric
discharge, the life
of
this
battery
will likely
be shorter than
that
noted above.
*Replace
the battery
if
the Nikon
Laser
Rangefinder
is
ever submerged in water or
if
water enters the battery chamber.
11
To Next Page
Loading...
Need help?
General
