Upgrading the COOLPIX 3100
Firmware
— Windows —
Thank you for choosing a Nikon product. This guide describes
how to upgrade the camera firmware for the COOLPIX 3100.
If you are not confident that you can perform the update
successfully, the
update can be performed by a Nikon service representative.
Get ready
To upgrade the firmware for the COOLPIX 3100, you will need:
• A COOLPIX 3100 digital camera
• A UC-E6 USB cable
OR a CompactFlash card reader
• One of the following power sources:
— An EH-61 AC adapter
— A new CRV3 battery
— Two fully-charged EN-MH1 rechargeable batteries
• A Nikon-approved CompactFlash memory card that has been formatted in the
COOLPIX 3100
•
The
Nikon Guide to
Digital Photography
for the COOLPIX 3100
Check the current firmware version for the
COOLPIX 3100
To Next Page
