WARNING
There are high voltage parts inside. Be careful of this electric shock,
when you remove the cover.
You must discharge the main condenser according to the instruction
of this repair manual after you remove the cover.
!
Points to notice for Lead-free solder products
・
Lead-free solder is used for this product.
・
For soldering work, the special solder and soldering iron are required.
・
Do not mix the lead-free solder with the conventional solder.
・
Use the special soldering iron respectively for lead-free solder and lead solder. They cannot be used in
common.
Note : ① Before disassembling, remove the SD card and battery.
② When disassembling, make sure to memorize the processing state of wires, screws to be
xed and their types, etc.
③ Because electrical parts are easily damaged by static electricity, make sure that you are
well earthed/grounded.
To Next Page
Loading...
