Nikon COOLPIX L101 - Viewing Pictures on a Computer

21
V
iewin
g
Pictures on a Compute
r
Viewing Pictures on a Computer
NOTE: The screenshots in this section are from Windows XP.
1
1
Turn the camera off .
3
3
Turn the camera on. PictureProject will automatically detect the camera
and the PictureProject Transfer window will be displayed in the computer
monitor. Click Transfer to copy all the pictures in the camera memory to
the computer.
Windows XP
Windows XP
If the dialog shown at right is displayed, select Copy
pictures to a folder on my computer using
PictureProject and click OK. To bypass this dialog in
future, check Always do the selected action.
2
2
Connect the USB cable as shown at right. Con-
nect the camera directly to the computer; do
not connect the cable via a USB hub or key-
board. Do not use force.
Install PictureProject Before Connecting the Camera
If PictureProject is not installed before the camera is connected, a hardware wizard
may be displayed. Click Cancel to exit and then disconnect the camera.