E37
Reference Section
b Slide Show
You can play back images, saved in the internal memory or on a memory card, one by one in
an automated “slide show.”
1 Use the multi selector to select Start and then
press the k button.
• To change the interval between images, select Frame
intvl, select the desired interval time, and then press the
k button before selecting Start.
• To repeat the slide show automatically, select Loop and
then press the k button before selecting Start. The check
mark (w) is added to the loop option when enabled.
2 The slide show begins.
• While the slide show is in progress, press the multi selector
K or I to display the next image or J or H to display the
previous image. Press and hold K or I to fast forward, or
J or H to fast rewind.
• To end or pause the slide show, press the k button.
3 End the slide show or restart it.
• The display at right appears when the last slide is displayed
or the show is paused. Highlight G and press k to return
to Step 1, or select F to restart the show.
Press the c button (playback mode) M d button M b Slide show M k button
Slide show
Frame intvl
Start
Loop
Pause
3s
To Next Page