Why does the time zone and date screen appear every time I turn on my Nikon COOLPIX L25?
If the screen for setting the time zone and date is displayed every time you turn on your Nikon Digital Camera, the clock battery is likely exhausted. This causes all settings to revert to their default values. Replace the clock battery to resolve this.
Why can't my Nikon COOLPIX L25 Digital Camera focus?
If your Nikon Digital Camera cannot focus, it might be because the subject is too close. Try shooting using easy auto mode, Close-up scene modes, or macro mode. The issue could also be that autofocus does not perform well with the subject. In this case, adjust your shooting conditions. If you are using L26 model, set AF assist in the setup menu to Auto. As a general step, try turning the camera off and then on again.
Why is the monitor blank on my Nikon COOLPIX L25 Digital Camera?
If the monitor on your Nikon Digital Camera is blank, there could be several reasons. First, ensure that the camera is turned on. Second, check and replace the battery, as it may be exhausted. Third, you might be in standby mode, so press the power switch, the shutter-release button, A button, c button, or b (e movie-record) button to exit standby mode. Fourth, if the flash lamp is flashing, wait until the flash has charged. Fifth, if the camera and computer are connected via USB cable, disconnect the USB cable. Finally, if the camera and TV are connected via audio/video cable, disconnect the audio/video cable.
Why doesn't the flash fire on my Nikon COOLPIX L25 Digital Camera?
If the flash on your Nikon Digital Camera isn't firing, first check if the flash mode is set to W (off) and change it to On. Also, make sure you haven't selected a scene mode that disables the flash. If Blink proof is enabled in the smart portrait menu, disable it. Finally, check for any other functions that might be restricting flash operation.
How to fix blurred images on Nikon Digital Camera?
If the images from your Nikon Digital Camera appear blurred, try enabling the flash. You can also activate electronic VR or motion detection. Alternatively, use the D (best shot selector) mode. For best results in stable conditions, use a tripod and the self-timer.
Why is the print date not available on my Nikon COOLPIX L25?
If the print date is not available on your Nikon Digital Camera, set the time zone and date in the camera's settings.
Why are my Nikon COOLPIX L25 Digital Camera images too bright?
If the images from your Nikon Digital Camera are too bright (overexposed), try modifying the exposure compensation settings.
Why isn't the AF-assist illuminator lighting up on my Nikon COOLPIX L25?
If the AF-assist illuminator does not light on your Nikon Digital Camera (L26 only), check if Off is selected for the AF assist option in the setup menu and change it to On. Also, note that the AF-assist illuminator may not light depending on the current scene mode, even when Auto is selected, so try changing the scene mode.
Why are no indicators displayed on my Nikon COOLPIX L25 monitor?
If no indicators are displayed in the monitor of your Nikon Digital Camera, it is possible that Hide info is selected for Photo info. Select Show info to resolve this.
Why do bright specks appear in images taken with flash on my Nikon COOLPIX L25?
If you're seeing bright specks in images captured with the flash on your Nikon Digital Camera, it's likely due to the flash reflecting off particles in the air. Try setting the flash mode setting to W (off).
General| Optical Zoom | 5x |
|---|---|
| Video Resolution | 720p |
| Type | Compact Digital Camera |
| Effective Pixels | 10.1 million |
| f/-number | f/3.2-6.5 |
| Construction | 6 elements in 5 groups |
| Autofocus (AF) | Contrast-detect AF |
| Focus-area Selection | Center, face detection |
| Storage Media | SD/SDHC/SDXC memory cards |
| File System | DCF, EXIF 2.3, DPOF compliant |
| ISO Sensitivity | ISO 80-1600 |
| Metering | Matrix, center-weighted, spot |
| Exposure Control | Programmed auto exposure |
| Aperture | Electronically-controlled ND filter (-2.6 AV) selection |
| Aperture Range | f/3.2-6.5 |
| Self-timer | 10 s |
| Interface | Hi-Speed USB |
| Data Transfer Protocol | MTP, PTP |
| Video Output | NTSC, PAL |
| HDMI Output | No |
| I/O Terminal | Audio/video (A/V) output; Digital I/O (USB) |
| Tripod Socket | 1/4 (ISO 1222) |
| Sensor Resolution | 10.1 MP |
| Digital Zoom | 4x |
| Battery Type | AA batteries |
| Image Sensor | 1/3 inch CCD |
| Lens | NIKKOR lens |
| Focal Length | 4.6-23.0 mm |
| Vibration Reduction (VR) | Electronic VR |
| Motion Blur Reduction | Motion detection |
| Focus Range | 50 cm (1 ft 8 in.) to infinity |
| Frame Coverage (Playback Mode) | Approx. 100% horizontal and 100% vertical |
| File Formats | JPEG |
| Image Size (pixels) | 3648 x 2736 (10M) |
| Shooting Modes | Auto, Scene |
| Continuous Shooting | Approx. 0.8 fps |
| Movie | AVI (Motion-JPEG compliant) |
| Exposure Compensation | -2.0 to +2.0 EV in 1/3 EV steps |
| Shutter Type | Mechanical and electronic shutter |
| Shutter Speed | 1/2000-1 s, 4 s (Fireworks show scene mode) |
| Flash Control | TTL auto flash |
| Power Sources | AA alkaline batteries, AA lithium batteries, AA Ni-MH rechargeable batteries |
| Battery Life (approx.) | Approx. 220 shots with alkaline batteries |
| Operating Environment | 0-40°C (32-104°F), humidity 85% or less (no condensation) |
| Supplied Accessories | Camera strap, AA alkaline batteries, USB cable |
| LCD Screen Size | 3.0 inches |
Essential information to review before operating the digital camera.
Crucial safety instructions to prevent injury and product damage.
Details the external components and layout of the camera body.
Guides on initial setup, including inserting batteries and memory cards.
Step-by-step instructions for turning on the camera and taking pictures.
Procedures for reviewing and deleting captured images on the camera.
Explains how the camera automatically selects optimal scene modes for shooting.
Details various scene modes and their optimal shooting conditions.
Lists common error messages and their corresponding troubleshooting steps.
Solutions for common problems encountered during camera operation.
To Next Page