E15
Reference Section
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
• Check printer settings.
B Notes About Power Source
• When connecting the camera to a printer, use a fully charged battery to prevent the camera from
turning off unexpectedly.
• If the AC Adapter EH-65A (available separately) is used, the camera can be powered from an
electrical outlet. Do not use any other make or model of AC adapter as it may cause the camera to
heat up or malfunction.
C Printing Images
In addition to printing images transferred to a computer from your personal printer and printing
over a direct camera-to-printer connection, the following options are also available for printing
images saved on the memory card:
• Inserting a memory card into a DPOF-compatible printer’s card slot
• Taking a memory card to a digital photo lab
For printing using these methods, specify the images and the number of prints each to the memory
card using the Print order option in the playback menu (E29).
To Next Page
Loading...
