5'
s_
o
o
A language-selection dialog is displayed the first time the camera is turned
on.
1 Turn on the camera.
• The power-on lamp (green) will light for a moment
and the monitor will turn on.
_._...__.... ...................._..._..................
2 Press the multi selector •, •, • or •
to choose the desired language and
press @.
• For information on using the multi selector, see
"Multi Selector" (PI_.8).
3 Press • or • to choose [Yes] and press Date
@.
• If [No] is selected, the date and time will not be set.
• The [Home time zone] menu is displayed.
• If daylight saving time is in effect, see "Daylight
Saving Time" on the next page.
Time zone
5 Press • or • to choose your home time Hometime
zone and press @.
• The [Date] menu is displayed.
12
To Next Page
Loading...
