The camera is equipped with a ten-second timer for self-portraits. When
using the self-timer, mount the camera on a tripod (recommended) or rest it
on a flat, and stable surface.
1 Press _ (self-timer).
• The self-timer menu is displayed.
£
o
m
£
o
"(3
:3-
• For information on using the multi selector, see
o_ "Multi Selector" (PI_.8).
-u
3 Frame the picture and press the
shutter-release button halfway. =
• The focus and exposure are adjusted.
0
4 Press the shutter-release button
fully.
• The self-timer starts. _'
• The self-timer lamp will blink for about
nine seconds. The lamp stops blinking one
second before the photograph is taken
and remains lit until the shutter is
released.
• A countdown of the time remaining until
the shutter is released is displayed in the
monitor.
• To cancel the self-timer without taking a
picture, press the shutter-release button again before the picture is taken.
26
To Next Page
Loading...
