What to do if Nikon Coolshot 40i Measuring Instruments does not turn on?
If your Nikon Measuring Instruments device isn't turning on, try the following: First, press the POWER ON/Measurement button located on the top of the body, near the side. If that doesn't work, check to ensure the battery is inserted correctly. Finally, try replacing the battery with a new one.
Why is my Nikon Measuring Instruments unable to measure?
If your Nikon Measuring Instruments device is unable to measure, first confirm each mode setting. Then, check if it can measure a large target that is close to you, for example, a building approximately 15m/yd ahead of you. Finally, clean the lens surface if necessary.
General| Exit pupil | 3.5 mm |
|---|---|
| Eye relief | 18.3 mm |
| Magnification | 6 x |
| Measurement range | 7.5 - 590 m |
| Objective diameter | 21 mm |
| Real field of view | 7.5 ° |
| Measurement accuracy | 0.75 m |
| Battery type | CR2 |
| Number of batteries supported | 1 |
| Operating temperature (T-T) | -10 - 50 °C |
Weight and Dimensions| Weight | 160 g |
|---|---|
| Dimensions (WxDxH) | 36 x 112 x 70 mm |
Essential safety guidelines for using the laser beam of the rangefinder to prevent eye damage.
Safety measures for using the monocular system and handling the device to prevent injury.
Guidelines for safe handling, insertion, and disposal of the lithium battery to prevent hazards.
Important cautions for use in various conditions and proper storage to maintain the device.
Identification of all parts of the rangefinder and a list of included accessories in the package.
Understanding the battery status icons shown in the display and their meaning.
Information on the expected battery life and factors affecting it.
Steps to prepare the device, install battery, and adjust the diopter for clear viewing.
Instructions on how to aim at the target and initiate a distance measurement.
How to use the continuous measurement feature and best practices for golf.
To Next Page