215
TECHNICAL NO
TES—SPECIFICA
TIONS
Self-timer Electronically controlled timer, duration 2–20 seconds
Combined electronic (CCD) and mechanical shutterShutter
Speed 30–
1
/
16,000
sec. (
1
/
3
increments), long time-exposure (bulb)
Flash
Sync contact X-contact only; flash synchronization at speeds of up to
1
/
500
s
Flash sync modes Front curtain (normal) sync, red-eye reduction, red-eye reduc-
tion with slow sync, slow sync, rear curtain
Flash control • Automatic balanced fill-flash controlled by five-segment TTL
multi-sensor with single-component IC
- 3D multi-sensor balanced fill-flash for D1 series (SB-28DX or
SB-50DX with type G or D Nikkor lens)
- Multi-sensor balanced fill-flash (SB-28DX or SB-50DX with
AI-P Nikkor or Nikkor lens of a type other than type G or D)
• Auto-aperture (AA) flash (SB-28DX with CPU Nikkor lens)
• Non-TTL auto flash (with SB-28DX, SB-50DX, SB-28, SB-27,
SB-22s, and other Speedlights)
Flash-ready light Lights when SB-28DX, SB-50DX, SB-28, SB-27, or SB-22s is fully
charged; blinks for three seconds after being fired at full output
Accessory shoe Standard ISO hot-shoe contact with safety lock
Sync terminal Standard JIS terminal with locking screw
Depth-of-field
preview button
Lens aperture stopped down when pressed
Remote control Remote control via 10-pin remote terminal or IEEE 1394 inter-
face (designed for speeds of up to 400 Mbps)
Monitor 2˝, 130,000-dot, low-temperature polysilicon TFT LCD with ad-
justable white LED backlight and brightness adjustment
Power source EN-4 Ni-MH Battery Pack, 7.2 V DC (can be recharged with op-
tional MH-17, MH-16 or MH-15 Quick Chargers); EH-4 AC adapter
(sold separately), 100 – 240 V AC
Tripod socket
1
/
4
˝ (JIS)
Dimensions
(W × H × D)
Approximately 157 × 153 × 85 mm (6.2˝ × 6.1˝ × 3.4˝)
We i g h t Approximately 1.1 kg (2.5 lbs) excluding battery
To Next Page
Loading...
