Nikon D2H - Page 207

195
Menu Guide—Custom Settings
Custom Setting e3: AA Flash Mode
This option controls whether fl ash level is auto-
matically adjusted for aperture when an external
exposure meter is used with an SB-80DX or SB-
28DX Speedlight (in the case of the SB-800, the
fl ash mode chosen with the Speedlight is used re-
gardless of the option chosen for Custom Setting
e3). Highlight e3 AA fl ash mode in the second
level of the CSM menu (
172) and press the
multi selector to the right. Press the multi selector up or down to highlight
an option, then press to the right to make a selection.
OK
e3 AA flash mode
CSM MENU
Off
OnON
OFF
Option Description
On
(default)
Off Aperture specifi ed manually using Speedlight controls (non-TTL auto).
Flash level automatically adjusted for aperture when external exposure me-
ter is used with SB-80DX or SB-28DX Speedlight (auto aperture).
*
*To use auto aperture with non-CPU lenses, specify maximum aperture of lens using
Non-CPU lens data option in shooting menu.
Custom Setting e4: Modeling Flash
This option determines whether the SB-800 emits
a modeling fl ash when the depth-of-fi eld preview
button is pressed. Highlight e4 Modeling fl ash
in the second level of the CSM menu ( 172)
and press the multi selector to the right. Press the
multi selector up or down to highlight an option,
then press to the right to make a selection.
OK
e4 Preview button
activates modeling flash
CSM MENU
Off
OnON
OFF
Option Description
On
(default)
Off No modeling fl ash emitted when depth-of-fi eld preview button is pressed.
SB-800 emits modeling fl ash when depth-of-fi eld is previewed ( 106).