Nikon D2H - Page 247

235
Technical Notes—Optional Accessories
Remote
terminal
accessories
The D2H is equipped with a ten-pin remote
terminal for remote control and automatic
photography. The terminal is provided with
a cap, which protects the contacts when the
terminal is not in use. The following acces-
sories can be used:
Accessory Description Length
*
MC-20
Remote Cord
Remote shutter release; can be used to reduce cam era
shake. Equipped with time-exposure and timer fea tures,
emitting a beep once a second while the shutter is open.
80 cm
(2´7˝)
MC-21
Extension Cord
Can be connected to MC-series 20, 22, 25, or 30.
3 m
(9´10˝)
MC-22
Remote Cord
Remote shutter release with blue, yellow, and black ter mi -
nals for connection to a remote shutter-triggering device,
allowing control via sound or electronic signals.
1 m
(3´3˝)
MC-23
Connecting
Cord
Connects two D2H cameras for si mul ta neous op er a tion.
40 cm
(1´4˝)
MC-25
Adapter Cord
Ten-pin to two-pin adapter cord for connection to de vic es
with two-pin terminals, including the MW-2 radio control
set, MT-2 intervalometer, and ML-2 modulite control set.
20 cm
(8˝)
MC-30
Remote Cord
Remote shutter release; can be used to reduce cam era
shake or keep the shutter open during a time exposure.
80 cm
(2´7˝)
ML-2 Modulite
Remote
Control Set
Allows infrared remote control at ranges of up to 100 m
(328´). Use multiple units for remote control over great er
dis tanc es. Re quires MC-25 adapter cord.
—
ML-3 Modulite
Remote
Control Set
Allows infrared remote control at ranges of up to 8 m
(26´).
—
* All fi gures are approximate.