VBA10501-R.3657.A
- Ｍ3 ･ -
Flash
Sync contact X-contact only; ash synchronization at up to 50 s
Flash contrrol
TTL TTL ash control by combined ve-segment TTL multi sensor with
single-component IC and 1,005-pixel AE sensor
• SB-800, 600: i-TTL balanced ll- ash for digital SLR and
standard i-TTL ash for digital SLR
• SB-80DX, 28DX, or 50DX with type G or D lens: 3D multi-sensor
balanced-ll ash for digital SLR
• SB-80DX, 28DX, or 50DX with other lens: multi-sensor balanced-
ll ash for digital SLR
• SB-80DX, 28DX, or 50DX with spot metering: standard TTL ash
for digital SLR
Auto aperture Available with SB-800, 80DX, or 28DX and CPU lens
Non-TTL auto Available with such Speedlights as SB-800, 28, 27, and 22s
Range-priority manual Available with SB-800
Sync modes Front curtain sync (normal), slow sync, rear-curtain sync, redeye
reduction, red-eye reduction with slow sync
Flash-ready indicator Lights when SB-series Speedlight such as 800, 600, 80DX,
28DX, 50DX, 28, 27, or 22s is fully charged; blinks for 3 s
after ash is red at full output
Accessory shoe Standard ISO hot-shoe contact with safety lock
Creative Lighting
System
With SB-800 and 600, supports Advanced Wireless Lighting
(SB-600 only supports AWL when used as remote ash), Auto
FP High-Speed Sync, Flash Color Information Communication,
modeling illumination, and FV Lock
Storage
Media Type I and II CompactFlash memory cards; Microdrives
File system Compliant with Design Rule for Camera File System (DCF) and
Digital Print Order Format (DPOF)
Compression • Compressed 12-bit NEF (RAW): approximately 50–60%
• JPEG: JPEG baseline-compliant, can be selected from Size priority
and Optimal quality
Self-timer Electronically controlled timer with 2 – 20 s duration
Depth-of-eld preview Lens aperture stopped down when depth-of- eld preview button is
pressed
Monitor 2.5
″ ,
232,000-dot, low-temperature polysilicon TFT LCD with
brightness adjustment
To Next Page
Loading...
