Nikon D300 - Custom Setting #A1 Continuous Servo AF Priority

V1.02
Thom Hogan’s Complete Guide to the Nikon D300 Page 521
Controls
CSM #F1 Center button shooting: Center AF
playback:Thumbnail
CSM #F2 Multi selector Do nothing
CSM #F3 PhotoInfo Image Browse < >
CSM #F4 FUNC button +dials Bracketing
CSM #F5 Preview button DOF Preview
CSM #F6 AE-L/AF-L button AE-L/AF-L
CSM #F7 Command dials direction: Normal
switch dials: Off
aperture: Sub
menus: Off
CSM #F8 Buttons and dials No
CSM #F9 No CF card? Enable release
CSM #F10 Reverse indicators + to -
Recommendation:
1. Use this setting carefully. While you can reload your
Custom Settings via the Load/save settings option on
the SETUP menu, this is an all-or-nothing thing (all camera
settings are saved or loaded). Thus, I try to keep my
Custom Setting experimentation to a single bank and only
reset that bank.
Custom Setting #A1 Continuous Servo AF Priority
(AF-C priority selection)
When the camera is set to Continuous Servo autofocus (AF-C
in Nikon’s usual abbreviation), you can choose whether the
shutter release or focus has the priority.
Release Shutter activated on release [default]
Release + focus Shutter activated on release, but in the
Continuous release shooting method the
shooting speed slows slightly to help focus