19
Matching Settings to Your Goal
Choosing a Color Temperature
Choosing a Color Temperature
To choose a color temperature for the amber (A)–blue (B)
axis, select a white balance setting of K (Choose color
temp.) as described opposite and then press the U but-
ton and rotate the sub-command dial until the desired
value is displayed in the rear control panel.
U button Sub-command dial Rear control panel
To enter a value directly in increments
of 10 K, press the U button and use
the multi selector, pressing 4 or 2 to
highlight digits and 1 or 3 to change.
To Next Page
Loading...
