Nikon D4 - Exposure Mode; White Balance

51
Before Filming
Exposure Mode
Before recording, press the I (Q) button and rotate
the main command dial to choose an exposure mode. The
settings that can be adjusted in movie live view are deter-
mined by the exposure mode as shown below.
Aperture
Aperture
Shutter speed
Shutter speed
ISO sensitivity
ISO sensitivity
Exposure comp.
Exposure comp.
e
e
,
,
f
f ———
✔
g
g
✔
——
✔
h
h
✔
✔
*
✔
—
* Slower speeds produce smoother results: at a frame rate of 30 fps,
for example, choose speeds between ⁄ s and ⁄ s. If fl ickering
lights cause fl icker or banding in the movie, change the shutter
speed and check the eff ect in the monitor. If the local power sup-
ply is 50 Hz, choose a shutter speed of ⁄ s.
White Balance
Press the U button and rotate the main command dial
to choose a white balance option. Note that you must exit
live view to measure preset white balance (page 20).
U button Main command dial Rear control panel
●●
●●