62
Interrupting Time-Lapse Photography
Interrupting Time-Lapse Photography
Time-lapse photography will end automatically if the bat-
tery is exhausted. The following will also end time-lapse
photography:
Selecting Start > O for Time-lapse photography
Pressing J between frames or immediately after a frame
is recorded
Turning the camera o
Removing the lens
Connecting a USB or HDMI cable
Inserting a memory card into an empty slot
Pressing the shutter-release button all the way down to
take a photograph
A movie will be created from the frames shot to the point
where time-lapse photography ended. Normal photogra-
phy can be resumed once time-lapse photography ends.
Note that time-lapse photography will end and no movie
will be recorded if the power source is removed or discon-
nected or the destination memory card is ejected.
•
•
•
•
•
•
•
Movies
To Next Page
Loading...
