Chapter 6 Operation Method
4 Operation
- 28 -
(2) For the NIS-Elements software sold separately or other applications
dedicated to the DS-U3
Operate the DS-U3 with reference to the instruction manual provided with each software.
* Keep the following requirements in mind when running the NIS-Elements software. This is because if
the computer enters the Standby mode, live images will not be updated after the computer wakes up.
Other problems may also arise.
• Do not close the computer (if it is a notebook).
• Do not press the Sleep button on the computer.
• Do not put the computer in Standby mode manually from an operating system menu.