Nikon DTM-532 - Page 82

Pris
m
PT1
O/S
St
a
PT2
<Side view>
St
a
PT1
PT2
dZ
Pris
m
<Plain view>
3
PRG: 1. 2Pt Re
f
Sight the prism or reflective sheet and press the
[MSR1] or [MSR2] key.
Sta: Horizontal distance from P1 to the
measure point along the P1-P2 Line
O/S: Horizontal offset from the P1-P2 Line to
the measured point
dZ: Vertical offset from the P1-P2 Line to the
measured point
• By pressing the [HOT] key, HT and T-P can be
changed at any time.
• Type of Target, Prism constant and measure-mode
can be changed by holding the [MSR1]/[MSR2] for
one second.
3-56