Nikon F 4 - Rewinding Film

REWINDING FILM
•To rewind film before reaching end of roll, follow the same procedure.
•Releasing the shutter after film rewind resets R1 lever. R2 lever is automatical-
ly reset when camera back is opened.
Film advance stops automatically at end
of roll, and red LED lights up.
Power rewind
Turn film rewind levers (R1) and (R2), while pressing respective lock release. This
starts film rewinding.
During film rewind, red LED blinks, frame counter counts backward and rewind knob
turns. After film rewind stops automatically, red LED turns off.