INSTALLING BATTERIES
With High Speed Battery Pack MB-21
Install three AA-type alkaline-manga-
nese or NiCd batteries with terminals
positioned as shown inside grip. Then
set the battery selector inside grip to
"LR6" for alkaline-manganese batteries,
or to "Ni-Cd" for NiCd batteries.
•When changing batteries, it
is
not necessary to remove
base
from camera body.
Remove battery holder (MS-21)
from
bottom portion (MB-21B).
Install three AA-type alkaline-manganese or NiCd batteries with terminals
positioned
as shown inside battery holder.
To Next Page
Loading...
