CONTROLS IN DETAIL————————————————————————————
FILM SPEED DIAL
The F4 offers two ways to set film speed, depending on film in use.
DX-Coded Film
While pressing the lock release, set the film speed dial to DX.
Camera automatically senses film speed (ISO 25 to 5000) of
installed DX-coded film.
With dial set to DX, use only DX-coded film. If non-DX-coded
film or film with a defective DX code is loaded, or no film is
loaded, lightly pressing the shutter release button causes the
red alert LED to blink, and the shutter locks.
To Next Page
Loading...
