Choose Center-Weighted Metering when you want to base
exposure on either Auto or Manual Exposure control for a
centrally located subject, Selecting Center-Weighted Metering
overrides Matrix Metering and concentrates 60% of the meter's
sensitivity into the center of the viewfinder which is outlined by
a 12mm circle.
This metering system is available with the F4's supplied
standard Multi-Meter Finder DP-20 and the optional AE Action
Finder DA-20.
For selective metering of tiny subjects or for advanced manual
metering techniques, use Spot Metering.
The area metered is represented by the approx. 5mm-diameter
circle in the center of the viewfinder. This metering system is
effective when precise measurement of a special portion of the
subject is required. The spot metering sensor is incorporated
in the F4's body, so Spot Metering is available with any of the
F4's interchangeable viewfinders.
To Next Page
Loading...
