FUNCTION SETIING
Focus mode:
Set focus mode
se
lector
to
M (Manual Focus), S (Single Servo
Autofocus) or C (Continuous Servo Autofocus).
For details on focus mode, see page 32.
Exposure mode:
Set exposure mode selector
to
M (Manual
),
PH (
Hi
gh-Speed
Programmed Aut
o),
P (Programmed Auto), S (Shutter-Priority
Auto) or A (Aperture-Priority Auto).
For
details on exposure modes and viewfinder
LCD,
see
page 48.
22
Metering system (with supplied standard Multi-Meter
Finder DP-20):
Set
metering system selector
to
Matrix (
:0:
),
Center-Weighted
( 0)) or Spot ( • ).
For details on metering systems and viewfind
er
information,
see page
44.
Film advance mode:
While pressing the lock release, set the film advance mode to
S (Single frame),
CH
(Continuous high speed), CL (Continuous
low speed) or Cs (Continuous
si
lent).
For details on film advance mode, see page
30.
To Next Page
Loading...
