CONTROLS IN
DETAIL-----------------
FILM SPEED DIAL
The
F4
offers two ways to set film speed, depending on film in use.
OX-Coded Film
While pressing the lock release, set the film speed dial to
OX.
Camera automatically senses film speed
(ISO
25
to
5000) of
installed OX-coded film.
28
With dial set to
OX,
use only OX-coded film.
If
non-OX-coded
fi
lm or film with a defective
OX
code
is
loaded, or no film is
loaded, lightly pressing the shutter release button causes the
red alert
LEO
to blink, and the shutler locks.
To Next Page
Loading...
