SELF-TIMER
Using the 10-sec. self-timer activates autofocus and light meter
operation.
1. While pressing the lock release, set film advance mode
selector to self-timer (
~
)
position.
2. Compose picture and confirm focus and exposure.
3. Fully depress shutter release button.
72
Self-timer
LED
starts blinking. During the final two seconds,
the
LED
blinks faster, warning you to get ready.
e
To
cancel
se
lf-timer operation, turn the film advance mode
selector to another setting.
e
ln
se
lf-tim
er
opera
ti
on,
th
e shutt
er
is
released whether
th
e
subject
is
in
focus or
not,
even in the Single Servo Autofocus
mode, so lightly press
th
e shutter release button first while
aiming the camera
at
the subject to secure correct focus.
e Exposure
is
conti
nu
al
ly monitored during self-timer operation
until just before the shutter
fires.
Use of eyepiece shutter or
eyepiece cover
is
recommended.
To Next Page
Loading...
