Nikon F4 - Page 87

1 With maximum aperture faster than fl3.5, use TC -16A
Autofocus Converter. Incompatible with maximum aperture
of fl3.5 or slower.
2 With maximum aperture faster than f/5.
6.
3 With maximum effective aperture faster than fl5.6.
4 With shutter speed set to
1/125 sec. or slower. Flash
necessary.
5 Aperture cannot be selected.
6 Exposure determined by presetting lens aperture. Exposure
must also be determined before shifting;
in A mode, use
AE-L button before shifting.
7 Shutter should be released, after exposure measurement,
by stopping down
PS -6.
8 Use stop-down measurement with Type
S, E, K, J, or P
focusing screen.
9 Use full-aperture measurement with maximum aperture
of
fll8 to fl2.8.
10 Focus lock button on TC-16 cannot be used.
11 Stop-down measurement possible. With aperture of f/5.6 or
slower, set exposure compensation dial (or focusing screen
exposure compensation dial for flash photography)
to-l
With 400mm fl5.6 lens, compensate exposure to -1 when
the lens aperture
is se t at fl8 or slower.
12 For full-aperture measurement, set exposure compensation
dial (or focusing screen exposure compensation dial for
flash photography)
to -l
13 For full-aperture measurement, set exposure compensation
dial
to +l
14 1n stop-down measurement, set exposure compensation
dial
(or focusing screen exposure compensation dial for
flash photography) to -l
15 In stop-down measurement, set exposure compensation
dial
to +l
16 Exposure compensation necessary. (See focusing screen's
instruction sheet.)
17 Exposure compensation necessary for fu ll -aperture
measurement.
(See footnote 12 or 13.)
18 Exposure compensation necessary for stop-down measure-
ment. (See footnote
14 or 15.)
• The following Nikkor lenses cannot be used with the
F4 s1 F4 camera: All 8mm fl8, 16mm fl3.5 (No. 272281 -
290000), 28mm fl3.5
(No. 625611 - 999999), 35mm fl1.4
(No. 385001 - 400000), all 55mm fl1.2, all old-type Ref l ex
1000mm fl6. 3, all 21mm fl4, all old-type PC 35mm fl3.5.
• The
AF Teleconverter TC-16 (fo r F3AF) cannot be attached
to the F4s camera.
•
To attach an old-type Reflex-Nikkor 500mm fl8 to an F4 s
camera, turn the lens' tripod mounting collar so it faces
the direction opposite the camera's grip (from the front of
the camera,
it should face the right-hand side). To change
the camera/lens assembly from horizontal to vertical
position
or vise versa, do not turn the assembly; turn the
tripod head.
87