-BASIC
OPERATION-continued----------
1l
Set
the
correct
exposure.
• First, position your main subject at the center (i.e
.,
the
12mm-diameter circle) of the field of view inside the viewfinder.
Then
turn the shutter speed dial ® and/or lens aperture ring @
until the
LED
lamp for the symbol for correct exposure 0
lights
up.
12
Important! Intermediate settings
of
lens aperture but not
of
shutter
speed are usable.
Nota:
The
meter reads the light over the entire focusing screen but has
a distinct bias on the central 12mm-diameter area.
To Next Page
Loading...
