Nikon FM2 - Basic Operation; Battery Installation

BASIC OPERATION------------
1 Remove the battery
• chamber lid 58 •
Use a coin to unscrew the lid in a counter-
clockwise direction.
6
2 Install the baUery.
• Wipe the battery terminals clean
and
in sert the batteri es , making sure that
the
+ signs are up. Usable batteries are:
•
3V lithium battery (1 unit)
• 1.55V silver-oxide batteries,
3.1V,
(2 units)
• 1.5V alkaline-manganese batteries,
3V ,
(2 units)
Caution: Keep batteries away from infants and
small children. In case
a battery is accidentally
swallowed, call
a doctor immediately as the
material inside the batteries can cause serious
problems.
"
3 Put the battery chamber
• lid back in Its place.
Slip the battery clip back into the camera
body baseplate and screw
it clockwise
tightly into place.
Note: For more information on batteri es , refer
to page
45.