Nikon LS-2000 Reference Manual

- 14 -
Parts and Accessories: Options
Optional Accessories
At the time of writing, the following optional adapters were
available for the LS-2000.
IA-20 adapter for IX240 film
System Requirements
To install and run the driver software for the LS-2000, your
computer system must meet the requirements listed below.
Macintosh
• Macintosh or Power Macintosh with a 68030 CPU or better
• MacOS System 7.1 or later
• ColorSync
• a minimum of 16 MB free RAM (24 MB or more is recom-
mended)
• 23 MB or more free hard disk space (100 MB or more is
recommended)
• video system supporting a color depth of at least sixteen bits,
or 32,000 colors (a color depth of twenty-four bits, or 16.7
million colors, is recommended)
Windows
• IBM PC/AT or compatible with i486 or better CPU
• Windows 95, Windows NT4.0 or later
• a minimum of 16 MB free RAM (24 MB or more is recom-
mended)
• 23 MB or more free hard disk space (100 MB or more is
recommended)
• DOS ASPI-compatible SCSI board with WINASPI.DLL (a list
of boards that have been tested and approved by Nikon is
provided separately)
• video system supporting a color depth of at least sixteen bits,
or 32,000 colors (a color depth of twenty-four bits, or 16.7
million colors, is recommended)
SF-200 slide feeder for
mounted 35 mm film

Nikon LS-2000 Specifications

General

Brand	Nikon
Model	LS-2000
Category	Film scanner
Language	English