EasyManua.ls Logo

Nikon COOLSCAN LS-10E - User Manual

Nikon COOLSCAN LS-10E
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Nikon
35mm Film Scanner
IllCOOLSCRn
III
(LS-IOE
Standard model &
LS-lO
Internal-mount model)
Instruction
manual
Before operating the unit, please read this manual throughly
and retain it for future reference.
Mode
d'emploi
Avant la mise en service de cet appareil, priere
de
lire attentivement
ce
mode d'emploi et de
Ie
conserver pour toute reference future.
Bedienungsanleitung
Lesen
Sie
vor der Inbetriebnahme diese Anleitung sorgfiiltig durch
und bewahren
Sie
sie
zum spiiteren Nachschlagen gut
auf
.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Nikon COOLSCAN LS-10E and is the answer not in the manual?

Summary

Getting Started

Scanner System Requirements

Specifies minimum hardware requirements for PC and Macintosh systems.

Scanner Usage Guidelines

Important usage notes, including power, handling, and environmental considerations.

Scanner Safety and Usage

Scanner Safety Regulations

European safety standards compliance and usage requirements.

Scanner Installation Precautions

Scanner Installation Steps

General precautions and steps for installing the scanner.

Setting the Standard Model LS-10 E

Connecting Scanner Power Supply

Instructions for safely connecting the scanner to the AC power source.

Setting Scanner SCSI ID

Explains how to set the SCSI ID for proper device identification on the bus.

Setting Up the Internal-mount Model LS-10

Installing LS-10 Scanner in Computer

Step-by-step instructions for installing the LS-10 scanner into a computer drive bay.

Setting Internal Scanner SCSI ID

How to set the SCSI ID for the internal scanner using DIP switches.

SCSI Chain Termination Guide

Explains the importance of SCSI chain termination and how to perform it.

Connecting Scanner to Computer SCSI

Instructions for connecting the scanner's SCSI interface to the computer.

Using the Scanner

Summary

Getting Started

Scanner System Requirements

Specifies minimum hardware requirements for PC and Macintosh systems.

Scanner Usage Guidelines

Important usage notes, including power, handling, and environmental considerations.

Scanner Safety and Usage

Scanner Safety Regulations

European safety standards compliance and usage requirements.

Scanner Installation Precautions

Scanner Installation Steps

General precautions and steps for installing the scanner.

Setting the Standard Model LS-10 E

Connecting Scanner Power Supply

Instructions for safely connecting the scanner to the AC power source.

Setting Scanner SCSI ID

Explains how to set the SCSI ID for proper device identification on the bus.

Setting Up the Internal-mount Model LS-10

Installing LS-10 Scanner in Computer

Step-by-step instructions for installing the LS-10 scanner into a computer drive bay.

Setting Internal Scanner SCSI ID

How to set the SCSI ID for the internal scanner using DIP switches.

SCSI Chain Termination Guide

Explains the importance of SCSI chain termination and how to perform it.

Connecting Scanner to Computer SCSI

Instructions for connecting the scanner's SCSI interface to the computer.

Using the Scanner

Nikon COOLSCAN LS-10E Specifications

General IconGeneral
BrandNikon
ModelCOOLSCAN LS-10E
CategoryScanner
LanguageEnglish

Related product manuals