Need help?Do you have a question about the Nikon Super CoolScan 9000ED and is the answer not in the manual?
General| Scanner Type | Film Scanner |
|---|---|
| Maximum Resolution | 4000 dpi |
| Optical Resolution | 4000 dpi |
| Bit Depth | 16-bit |
| Dynamic Range | 4.8 Dmax |
| Film Format | 35mm |
| Interface | IEEE 1394 (FireWire) |
| Included Software | Nikon Scan |
Details media types supported for scanning, including film formats and slides.
Specifies aperture sizes and scan ranges for various film types.
Describes the scanning system as fixed optical, movable media, single-pass.
Details the light source as RGBIr LEDs with a slit light source.
Information about the 10,000-pixel three-line monochrome CCD image sensor.
Explains color separation is performed by RGB LEDs.
Specifies optical resolution up to 4000 pixels per inch.
Details the A/D conversion as 16 bits per color.
Describes output as full color or greyscale at 8 or 16 bits per channel.
Specifies focus modes as auto and manual.
Indicates the interface used is IEEE 1394.
Details power consumption in normal and standby modes.
Specifies AC power requirements for operation.
Defines temperature and humidity range for operation.
Provides size and weight specifications of the unit.
Lists scanning times for different settings and film holders.
Describes film holders provided with the scanner.
Details optional film holders available for the scanner.
Instructions for removing the external covers and panels.
Steps to remove the main printed circuit board and power PCB.
Procedure for removing the illumination unit and base unit.
Instructions for disassembling the stage carriage unit.
Steps to remove the lead screw from the stage carriage.
Instructions for disassembling the auto-focus carriage unit.
Further details on disassembling the AF carriage unit components.
Procedure for removing the lead screw, AF motor, and mirror.
Steps for assembling the mirror and AF sensor components.
Detailed instructions for assembling the AF screw shaft.
Procedure for assembling the auto-focus motor unit.
Instructions for assembling the AF carriage unit.
Further steps in assembling the AF carriage unit.
Connecting the various parts of the AF carriage unit.
Steps for assembling the main stage carriage.
Procedure for assembling the stage carriage screw shaft unit.
Detailed instructions for assembling the screw shaft.
Steps for mounting the SCAN motor unit.
Further assembly steps for the stage carriage unit.
Instructions for assembling the holder motor unit.
Steps for assembling the illumination unit.
Further assembly steps for the illumination unit.
Instructions for assembling the base unit.
Steps for assembling the main PCB and power unit.
Instructions for assembling the front panel.
Final checks and assembly of the external view.
Detailed steps for adjusting the CCD unit.
Procedure for performing auto-focus adjustment.
Guide on starting and using the inspection software.
Steps for conducting various inspections using the software.
Instructions for upgrading the scanner's firmware.
Procedure to test and check illumination irregularity.
Steps for performing the shading inspection.
Procedure for noise checking during scanning operation.
Steps for inspecting mechanical precision.
Procedure to inspect AF focal precision and position.
Instructions for testing with the IR pass filter.
Procedure to rewrite compensation data for IR pass filter.
Steps for testing positive color reproduction.
Managing log data, including clearing and saving.
Procedures for managing White Balance time data.
Specifies standards for illumination irregularity, shading, and brightness.
Defines standards for AF performance and scanning accuracy.
Specifies standards for image quality and scanning times.
Standards for operating sounds, status indication, and power consumption.
Lists tools required for operation, maintenance, and adjustment.
Comprehensive list of all parts with numbers, codes, and quantities.
To Next Page