Nikon COOLSCAN LS-10E - Specifications

78
Specifications
1. Reading system/Optics
Film type
35 mm film (colour or monochrome , positive or
negative)
Reading resolution
2,592 x 3,888 pixels
Effective resol ution
2,393 x 3,648 pixels (with
strip film holder)
Reading
area
24 .3 x 36 .5 mm
Effective area
22 .5 x 34.3 mm (with strip film holder)
Light source
RGB 3-colour LED
Colour separation
3-filter selectable LED
Film
holder
No holder needed for mounted slides , strip film
holder for strip sli des
Imaging optics
High-resolution optics (Autofocus, Manual focus)
Gradation
256
gradations each for R, G and B
2. Scanning/Signal processing
Image scanning (single pass)
Main scanning:
2,592-
element CCD line sensor
Sub-scanning:
Moving film stage driven by step motor
Scanning time
Pre-scan:
Approx . 30 sec.
Actual scan:
depends on the kind of interface,
resolution
setting and film density
(Approx. 140 sec. for 3-colour within a
1,000 x 1,
OOO -pixel range with standard film)
Scanning density
2,700 dpi
Pixel size: 9.4
Jim square
Pixel density: 106 pixels/mm on film
AID conversion
8 bits