Nikon LS-2000 User Manual

17
3. Setup
Nikon LS-2000 35 mm Film Scanner User’s Guide
Windows
• IBM PC/AT or compatible with i486 or better CPU
• Windows 95, Windows NT4.0 or later
• a minimum of 16 MB RAM when Nikon Scan is running (24 MB
or more is recommened) and 8 MB RAM for Adobe Acrobat
• 28 MB or more free hard disk space (100 MB or more is recom-
mended)
• DOS ASPI-compatible SCSI board with WINASPI.DLL (a list
of boards that have been tested and approved by Nikon is
provided separately)
• video system supporting a color depth of at least sixteen bits, or
32,000 colors (a color depth of twenty-four bits, or 16.7 million
colors, is recommended)
Step 2—Install Adobe Acrobat Reader
Before turning on your scanner, you may wish to install Adobe
Acrobat Reader and read the on-line documentation provided on the
reference CD-ROM. To install Adobe Acrobat Reader, follow the
installation instructions for your platform given below.
Windows
With the scanner turned off, turn on
your computer and place the refer-
ence CD in the drive. Double-click
the My Computer icon and then
double-click the Nikon CD icon.
Open the folder for the language of
your choice(the CD provided with
scanners sold in the U.S.A. and
Canada contains English, French, and
Spanish folders only) and then
double-click setup.exe to start the
installer. Follow the on-screen
directions to install Adobe Acrobat
Reader in the location of your choice.

Nikon LS-2000 Specifications

General

Brand	Nikon
Model	LS-2000
Category	Film scanner
Language	English