What to do if my Nikon Measuring Instruments does not turn on?
If your Nikon Measuring Instruments device isn't turning on, try the following: * Press the POWER ON/Measurement button located on the near side, top of the body. * Check to ensure the battery is correctly inserted. * Replace the battery with a new one.
Why is my Nikon Measuring Instruments unable to measure or showing anomalous results?
If your Nikon Measuring Instruments is unable to measure or is showing anomalous results, please check the following: * Confirm each mode setting. * Confirm if the device can measure a large target close to you (for example, a building approximately 15m/yd ahead). * Clean the lens surface if necessary.
General| Waterproof | Yes |
|---|---|
| Fogproof | Yes |
| Laser Wavelength | 905 nm |
| Angular Field of View (Real) | 6.0° |
| Auto Power Shut-Off | 8 sec. |
| Lens Coating | Multicoated |
| Laser Classification | Class 1 |
| Power Source | CR2 Lithium Battery |
Observe precautions for the invisible laser beam to avoid eye damage and ensure safe operation.
Handle the battery correctly to prevent rupture, leakage, corrosion, or overheating.
Step-by-step instructions on how to open, insert, and close the battery chamber.
Steps to turn on power, aim at the target, and start measurement.
Lists common problems like 'Does not turn on' or 'Unable to measure' with their causes and solutions.
To Next Page
